ZSK40铣方机设备特点：
1.适应中小型零件铣外方，二、四、六、八方等。
2.采用数控系统，可实现曲面、台阶面、孤性面、锥面加工。
3.运作模式手动，半自动可选;可加装送料装置，实现全自动化生产，节省人力。
4.改变传统铣方加工工艺，可提高2- 5倍效益，且产品表面光洁度高。
1. Adapt to milling of small and medium- sized parts outside, two, tour, six, eight, etc.
2. Using a numerical control system, it can reilze the processing of curved surfaces,
stepped surfaces, solitary surfaces and conical surfaces.
3. The operatlion mode Is manual and seml- -automatic optonal; feeding devlce can
be added to realize fully automated production and save manpower.
4. Changing the traditional milling processing technology can increase the eficiency
by 2-5 times, and the surface finish of the product is high.
设备参数：
| 最大工件切削直径Max.utting Diameterof workpiece | 60mm | 铁方产品表面光洁度The roughness of product surface | 1.6 -3.2μm |
| 车方有效行程Efective travel o polygon | 80mm | 正常工作油泵压力Normnal working oil pump pressure | 20-40mpa |
| 主轴通孔直径Spingle hole diameter | φ48mm | X/Y轴伺服电机XY aixs servo motor | 4N.m/4N.m |
| 拉管通孔直径Drawn pipe hole diam | 040mm | 控制器变压器Controllr transformer | 1.5kw |
| 主电机功率Main motor power | 2.2kw-6 | 机床变压器Machine tool transformer | 150w |
| 变频器Inverter | 3.7kw | 外部电源Extemal power supply | 380v/3ph/50hz |
| 主轴转速范围Spindle speed range | 100-1200rpm | 机床尺寸Machine outside dimensions | 1500*1020*1640mm |
| 车方对边公差polygon tolerance of opposite side | 0.05mm | 机床净重Machine net weight | 900KG |
| 车方长度公差polygon length tolerance | 0.08mm |
|
|
服务热线： 
